painted flower pot Archives - Mama.Papa.Bubba.

A few weeks ago, Gracen’s {great} aunt sent me this photo of a footprint butterfly flower pot and asked if Miss G could make her one. After some serious detective work, I believe that the photo was originally shared on Carol’s Classic Gifts and Decor’s Facebook page, but I could be wrong (please correct me if I am!) Though there were no instructions attached, the project looked pretty straight forward, we went for it.

{this post includes affiliate links}

Here’s what we used… A clay pot large enough to fit Grae’s growing feet on the side, some acrylic paint, a few old foam paintbrushes, a black Sharpie (though black paint and a fine brush or a paint pen would be great also), and lastly, a matte spray-on clear coat.

Because of the potentially {very} messy nature of this project, we opted to do it outside with the garden hose and a pile of old rags nearby (and I’m thankful we did…things got MESSY despite my precautionary steps). To get started, I applied a thick layer of paint to Grae’s foot. In our case, we used purple and green (Auntie Judy’s favourite colours) with a little bit of white in the middle, but you could obviously use any colours you like. One thing I would say is that if you want the colours to mix together where they meet, you should probably help them along with your paintbrush while on the foot. I expected the mixing to sort of naturally happen when Grae’s foot was pressed down on the pot, but it didn’t (not a lot, at least).

We carefully pressed one foot onto the pot, washed it off, then painted the other foot and pressed it on so that the two straight edges were in the middle (with a small space between them) and the two arched edges were pointing outwards.

After giving the footprints a few minutes to dry, I used the Sharpie to draw a very simple butterfly body and antennae in the centre.

Then we flipped the pot over and wrote a little message so that Auntie Judy will remember who made the pot and when it was created years down the road.

As a final step, I gave the butterfly part of the pot a light spray of matte sealant, just to make it a little more durable. Ten minutes later it was dry and we had an adorable personalized gift that was both easy and inexpensive to make.