A few weeks ago, Gracen’s {great} aunt sent me this photo of a footprint butterfly flower pot and asked if Miss G could make her one. After some serious detective work, I believe that the photo was originally shared on Carol’s Classic Gifts and Decor’s Facebook page, but I could be wrong (please correct me if I am!) Though there were no instructions attached, the project looked pretty straight forward, we went for it.
{this post includes affiliate links}
Here’s what we used… A clay pot large enough to fit Grae’s growing feet on the side, some acrylic paint, a few old foam paintbrushes, a black Sharpie (though black paint and a fine brush or a paint pen would be great also), and lastly, a matte spray-on clear coat.
Because of the potentially {very} messy nature of this project, we opted to do it outside with the garden hose and a pile of old rags nearby (and I’m thankful we did…things got MESSY despite my precautionary steps). To get started, I applied a thick layer of paint to Grae’s foot. In our case, we used purple and green (Auntie Judy’s favourite colours) with a little bit of white in the middle, but you could obviously use any colours you like. One thing I would say is that if you want the colours to mix together where they meet, you should probably help them along with your paintbrush while on the foot. I expected the mixing to sort of naturally happen when Grae’s foot was pressed down on the pot, but it didn’t (not a lot, at least).
We carefully pressed one foot onto the pot, washed it off, then painted the other foot and pressed it on so that the two straight edges were in the middle (with a small space between them) and the two arched edges were pointing outwards.
After giving the footprints a few minutes to dry, I used the Sharpie to draw a very simple butterfly body and antennae in the centre.
Then we flipped the pot over and wrote a little message so that Auntie Judy will remember who made the pot and when it was created years down the road.
As a final step, I gave the butterfly part of the pot a light spray of matte sealant, just to make it a little more durable. Ten minutes later it was dry and we had an adorable personalized gift that was both easy and inexpensive to make.
If you love making personalized gifts, be sure to check out our ‘I love you’ pillowcase, our hand-shaped ring dish, our clay handprint keepsakes, and our paper strip handprint keepsake.
♥
Are you following us on Facebook and Instagram?
We’d love to have you!
Gracen and I have been spending a whole lot of time at the beach lately (yay!), but this afternoon, we finally got around to finishing off a fun little project we started days and days ago.
It began like this. Coffee filters, coloured water, and a plastic dropper out, 
Of course it didn’t take Grae long to find a table full of fun materials to experiment with. Without hesitation, she began using her dropper to slurp up coloured water and spew it back out on the filters.
She really loved watching how the colours spread and mixed with one another.
So much in fact, that she fully covered upwards of 30 separate filters. Thank goodness for a big laundry drying rack! We placed the filters on the rack in our solarium, and they dried in no time.
After tucking them away for several days, we came home from the beach today {some of us still sporting our bathing suits and sandy fingernails} and dug them out for a quick pre-nap project. We also gathered a pair of scissors, some long green pipe cleaners, and some short colourful pipe cleaners (regular pipe cleaners cut into thirds).
To transform our beautiful watercolour-y filters into flowers, we started by carefully folding them in half three times. 
Then Grae would give me some sort of petal description (‘long and skinny!’, ‘pokey like the rose bush!’, ‘big, big, big, big, BIIIIIIIG!’, and ‘you know…..like….ummmm….like the little circle circle ones?’ were a few) and I’d cut the curved edge to match. I also snipped the very tip of the point off at this point too.
Then came her very favourite part – carefully unfolding the cut filter to reveal its shape.
Here are a few of the other shapes we came up with together.
Next, Grae would pick a small pipe cleaner, bend over the top so it was no longer pokey, and place the bottom through the tiny hole in the centre of the filter.
Then she’d bring the filter up around the pipe cleaner and pinch it at the base.
While she held it tightly, I’d wrap a long green pipe cleaner around the filter and short pipe cleaner to form the stem.
Fun, right?
Every flower turned out completely different from the last…
And by the end we had a beautiful bouquet of colourful flowers perfect for the mantle, a table centrepiece, or a Mother’s Day gift. 
Back when we were living in Kuwait, I remember desperately longing for rain. The kind that lasts days and days and lends itself to cozy hoodies, movie afternoons, and pots of soup simmering on the stove. Well, I’m happy to say, I think I’ve officially had my fix. It’s been raining for several days in a row now, and though lazy afternoons on the couch watching documentaries and romantic comedies don’t exactly fit well with our current life, we’ve enjoyed the rain nonetheless. 
The project started off as a 
Grae decorated her coffee filters independently for a while, and then asked me to join her to finish them off. 
Afterwards, Miss G used an easy-to-squeeze spray bottle to soak the filters pretty thoroughly.
While waiting for them to dry, we began to work on our butterfly bodies. Using Sharpies, we drew little faces on the tops of the bamboo pins.
Here they are when done.
Next, Grae chose some pipe cleaners from our stash, we cut them in half, and bent them into little antennae shapes.
When we got back to our filters, they weren’t quite dry yet, so we took a blowdryer to them. 10 seconds each was all they needed.
To assemble the butterflies, we simply pinched them across the middle (Miss G did this job) and fanned the wings out nicely (my job).
Then Grae carefully selected a clothespin body and a set of sparkly antennae and we clipped everything together.
Here are are the two butterflies Miss G declared her favourites.
At the last minute, we decided to add magnets to the backs of the clothespins with hot glue (I also popped a little squeeze of glue into the tops of the clothespins too, just to hold everything together more permanently).
And here’s my proud little girl with her finished project.